Code
Explanation
items authorized for use in units within their commands.
Recommendations for increase in range of items
O-Repairable item When uneconomically repairable,
authorized for use will be forwarded to Commander, US
condemn and dispose at organizational level.
Army Electronics Command, ATTN: AMSEL-MA-SR,
F-Repairable item When uneconomically repairable,
Fort Monmouth, NJ., 07703.
condemn and dispose at the direct support level.
(3) Allowance quantities are indicated in
H-Repairable item When uneconomically repairable,
the special tools list section for special tools, TMDE, and
condemn and dispose at the general support level.
other support equipment.
D-Repairable item When beyond lower level repair
g. 30-Day DS/GS Maintenance Allowances.
capability, return to depot Condemnation and
NOTE
disposal not authorized below depot level.
Allowances in GS column are for GS
L-Repairable item Repair, condemnation, and disposal
maintenance only.
not authorized below depot/Specialized Repair
Activity level.
(1) The repair parts indicated by asterisk
A-Item requires special handling or condemnation
entries in separate allowance columns for DS and GS
procedures because of specific reasons (i.e.,
represent those authorized for use at that category of
precious metal content, high dollar value, critical
maintenance to be requisitioned on an "as required"
material or hazardous material).
basis, until stockage is based on demand in accordance
b. Federal Stock Number.
Indicates the
with AR 710-2.
Federal stock number assigned to the item and will be
(2) Allowance quantities are indicated in
used for requisitioning purposes
the special tool lists section for special tools, TMDE, and
c. Description. Indicates the Federal item
other support equipment
name and a minimum description required to identify the
h. 1-Year Allowances Per 100 Equipments/
item The last line indicates the reference number
Contingency Planning Purposes. Column intentionally
followed by the applicable Federal Supply Code for
left blank.
Manufacturer (FSCM) in parentheses. The FSCM is
i.
Depot Maintenance Allowance Per 100
used as an element in item identification to designate
Equipment. This column indicates opposite the first
manufacturer or distributor or Government agency, etc.,
appearance of each item the total quantity authorized for
and is identified in SB 708-42.
depot maintenance of 100 equipments.
d. Unit of Measure (U/M).
Indicates the
j.
Illustration.
standard or basic quantity by which the listed item is
(1) Figure number Indicates the figure
used in performing the actual maintenance function.
number of the illustration on which the item is shown in
This measure is expressed by a two character
TM 11-1167-35.
alphabetical abbreviation; e.g., ea, in, pr, etc., and is the
(2) Item number Indicates the item
basis used to indicate quantities and allowances in
number or reference designation used to reference the
subsequent columns. When the unit of measure differs
item in the illustration.
from the unit of issue, the lowest unit of issue that will
satisfy the required units of measure will be
1-4.
Special Information
requisitioned.
a. Usable on codes are included in column 3
e. Quantity Incorporated in Unit. This column
Uncoded items are applicable to all models Identification
indicates the quantity of the item used in the equipment.
of the usable on codes used in this publication are-
Subsequent appearances of the same item in the same
assembly are indicated by the letters "REF".
Code
Used on
f.
15-Day
Organizational
Maintenance
AYH
CM-36/TPS-1D
Allowances.
AYI
CM-36A/TPS-1D
(1) The repair parts indicated by an
b. The following publication pertains to the
asterisk in the allowance column represent those
equipment and its components:
authorized for use at the organizational category, and will
TM 11-1167-10
Operator's Manual: Radio
be requisitioned on an "as required" basis, until stockage
Set AN/TPS-1D.
is based on demand in accordance with AR 710-2.
(2) Major
Army
commanders
are
authorized to approve reduction in the range of support
4