TM 11-6625-1559-12
the side of the Sweep generator and connect the
socket marked 60
For operation at 230 volts,
two units as follows:
set the input power switch to 230V. If the fre-
quency of the input power is 50 cycles, connect
a. Connect the vertical amplifier input of the
the plug to the socket marked 50
oscilloscope to the SCOPE VERT jack on the
preamplifier chassis at the rear of the sweep
2-8. Oscilloscope Connections
the oscilloscope to the SCOPE HORIZ jack on
the rear panel of the main chassis.
visual presentation of the response curves of the