TM 11-6625-2780-24P-1
capability to perform complete repair (i.e., all author-
sure will be requisitioned.
ized maintenance functions). This position will con-
h. Quantity Incorporated in Unit. Indicates the
tain one of the following maintenance codes:
quantity of the item used in the breakout shown on
the illustration figure, which is prepared for a func-
Application/Explanation
tional group, subfunctional group, or an assembly.
Code
H-- The lowest maintenance level capable of com-
4. Special Information
plete repair of the support item is the general
support level.
a. The following publication pertains to the
Z Nonreparable. No repair is authorized.
SG-1112(V)2/U and its components:
(3) Recoverability code. Recoverability codes
TM
11-6625-2780-14&P,
Signal
SG-1112(V)1/U and SG-1112(V)2/U
are assigned to support items to indicate the disposi-
tion action on unserviceable items. The recoverabil-
SG-1112(V)1/U
ity code is entered in the fifth position of the Uniform
b. National stock numbers (NSN's) that are miss-
SMR Code format as follows:
ing from P source coded items have been applied for
and will be added to this TM by future change/
Recoverability
Definition
codes
revision when they are entered in the Army Master
Z-- Nonreparable item. When unserviceable, con-
Data File (AMDF). Until the NSN's are established
demn and dispose at the level indicated in posi-
and published, submit exception requisitions to
tion 3.
H -- Reparable item. When uneconomically repara-
C o m m a n d and Fort Monmouth, ATTN: DR-
ble, condemn and dispose at the general sup-
SEL-MM, Fort Monmouth, NJ 07703 for the part
port level.
required to support your equipment.
c. National Stock Number. Indicates the National
5. How to Locate Repair Parts
stock number assigned to the item and will be used
a. When National stock number or part number is
for requisitioning purposes,
unknown.
d. Federal Supply Code for Manufacturer (FSCM).
(1) First. Using the table of contents, determine
The FSCM is a 5-digit numeric code listed in SB
the functional group within which the item belongs.
708-41/42 which is used to identify the manufac-
This is necessary since illustrations are prepared for
turer, distributor, or Government agency, etc.
functional groups and listings are divided into the
e. Part Number. Indicates the primary number
same groups.
used by the manufacturer (individual, company,
(2) Second. Find the illustration covering the
firm, corporation, or Government activity), which
functional group to which the item belongs.
controls the design and characteristics of the item by
(3) Third. Identify the item on the illustration
means of its engineering drawings, specifications,
and note the illustration figure and item number of
standards, and inspection requirements to identify
the item.
an item or range of items.
(4) Fourth. Using the Repair Parts Listing, find
NOTE
the figure and item number noted on the illustration.
When a stock numbered item is requisi-
b. When National stock number or part number is
tioned, the repair part received may have a
known.
different part number than the part being
(1) First. Using the index of National Stock
replaced,
Numbers and Part Numbers, find the pertinent
f. Description. Indicates the Federal item name
National stock number or part number. This index is
and, if required, a minimum description to identify
in NIIN sequence followed by a list of part numbers
the item.
in alphameric sequence, cross-referenced to the illus-
g. Unit of Measure (U/M). Indicates the standard
tration figure number and item number.
of the basic quantity of the listed item as used in
(2) Second. After finding the figure and item
performing the actual maintenance function. This
number, locate the figure and item number in the
measure is expressed by a two-character alphabetical
repair parts list.
abbreviation (e.g., ea, in, pr, etc). When the unit of
6. Abbreviations
measure differs from the unit of issue, the lowest unit
of issue that will satisfy the required units of mea-
Not applicable.
(Next printed page is 4.1)
2