TM 11-6625-3041-12/TO 33A1-8-908-1
The SG-1139 can be mounted in a standard 19-inch rack. It is recommended
that two persons be used for the actual mounting.
Bracket
Remove the two
q
mounting brackets
Installation
from cover.
Use a cross-tip
q
screwdriver to
secure a mounting
bracket to each
side of SG-1139
with four 10-32
UNF-2Bx3/8 in.
screws through
No. 10 flat
washers (not
supplied).
Ground
Support one end of
q
Wire
the SG-1139 and
swing the other
end out.
Press in cap on
q
GND lug to expose
internal slot,
place heavy gage
wire (not sup-
plied) in slot,
and release pres-
sure on cap.