TM 11-6625-3041-30/TO 33A1-8-908-12
2-17. INTERFACE BOX REPAIR (CONT)
Defective
Multi pin
Connector
TO REMOVE
PIN, PUSH
FROM THIS
DIRECTION
If pins are defective:
q Use
hand or slip-joint pliers to loosen knurled nut
RX116-7 extractor to push out defective pin.
q Use
pliers to cut off defective pin from wire.
q Use
diagonal
q Strip
wire and use M22520 crimping tool to crimp new pin
onto wire.
q Use
RTM16-2 insertion tool to install new pin.
q Use
hand or slip-joint pliers to tighten knurled nut.
If shell is defective:
q Use
hand or slip-joint pliers to loosen knurled nut.
q Use
RX116-7 extractor to push out all 19 pins. Record
locations of pins for later reinsertion.
q Use
1 1/4-in. wrench or slip-joint pliers to remove mounting
nut.
q Remove
multi pin connector shell.
q Install
new connector shell.
q Install
mounting nut and use 1 1/4-in. wrench or slip-joint
pliers to tighten.
q Use
RTM16-2 insertion tool to push in all 19 pins.
q Use
hand or slip-joint pliers to tighten knurled nut.