TM 11-6625-3051-12
Unpacking Equipment
Figure 3-1.
Cut and remove paper sealing tape on carton top and open carton (2).
a.
Grasp signal generator (3) firmly while restraining shipping carton (2) and lift equipment and packing material
b.
(1) vertically.
Place signal generator (3) and end cap packing material (1) on flat table or surface.
c.
Remove end cap packing material (1) while firmly supporting signal generator (3).
d.
Remove protective plastic bag from signal generator (3). Place desiccant bags back inside protective plastic
e.
bag.
f.
Place protective plastic bag and end cap packing material (1) inside shipping carton (2).
Return shipping carton (2) to supply system.
g.
3-5. CHECKING UNPACKED EQUIPMENT.
Inspect equipment for damage incurred during shipment. If equipment has been damaged, report
a.
damage on Form SF 364, Report of Discrepancy.
3-2