TM 11-6625-3053-14
Premature switching to CW position may cause damage
to the klystron tube. When modulation is switched to
CW, the POWER LEVEL meter needle will register to
the right.
When switching to CW, the power level meter needle will register toward the right.
c. Frequency Selection. Turn the FREQUENCY control so that the desired frequency appears on the
FREQUENCY MHz readout. Turning the control clockwise increases the frequency, turning it counter- clockwise
decreases it. The numbers in the readout show frequency in MHz. Tenths of MHz may be read by reading the horizontal
lines on the right side of the right hand number against an arrowhead at the extreme right hand of the readout opening.
2-11