TM 3-1040-276-10
3-5. REPLACING SPARK IGNITER.
a. Removal.
a. Hold spark igniter (1) with one wrench and
turn cable nut (2) with another wrench to dis-
connect shielded ignition cable (3).
b. Unscrew spark igniter (1) from ignition base
Remove gasket (5) as spark igniter is
removed.
b. Cleaning and Inspection.
NOTE
If mission dictates, replace spark igniter with spare and clean, inspect, and reinstall spark igniter later.
Clean spark igniter (1) with dry cleaning solvent
for cracked insulator (6), burned or pitted center
pole (7), and cut or missing gasket (5). If dam-
aged, replace with spare.
3-9