TM 3-1040-276-10
3-5. REPLACING SPARK IGNITER (Cont).
c. Installation.
CAUTION
Make sure spark igniter is installed with
its gasket. Installing igniter without gasket
may crack insulator.
Install gasket (5) on spark igniter. Install and tighten
a.
spark igniter in ignition base assembly (4).
Connect and tighten shielded ignition cable nut (2)
b.
to spark igniter (1).
3-6. REPLACING FUEL TUBE.
Close float bowl toggle valve (1).
a.
b.
Pull fuel tube (3) from metering jet (4) and float bowl
connector (5).
Install hose clamps on new fuel tube.
c.
Slide fuel tube on metering jet and float bowl
d.
connector.
Change 1
3-10