TM 3-1040-281-20&P
MAINTENANCE INSTRUCTIONS
Section I. REPAIR PARTS SPECIAL TOOLS TEST, MEASUREMENT,
AND DIAGNOSTIC EQUIPMENT (TMDE); AND SUPPORT EQUIPMENT
2-1. COMMON TOOLS AND EQUIPMENT. For autho-
2-3. REPAIR PARTS. Repair parts are listed and illus-
rized common tools and equipment, refer to the Modi-
fied Table of Organization and Equipment (MTOE)
assigned to your unit.
2-2. SPECIAL TOOLS, TMDE, AND SUPPORT
EQUIPMENT. Refer to the Maintenance Allocation
Chart (app B) for support equipment.
Section II. SERVICE UPON RECEIPT
2-4. CHECKING UNPACKED EQUIPMENT.
ties in accordance with the instructions of
DA PAM 738-750.
a. Inspect the equipment for damage incurred dur-
ing shipment. If the equipment has been damaged,
c. Check to see whether the equipment has been
report the damage on SF 364, Report of Discrepancy
modified (DA PAM 310-1).
(ROD).
b. Check the equipment against the packing slip to
see if the shipment is complete. Report all discrepan-
2-5. INSTALLATION INSTRUCTIONS.
This task covers vehicle preparation and installation of the M288 mounting kit components.
INITIAL SETUP
Facilities and Equipment
Materials/Parts
Shop area with overhead
Tie down straps (item 11, app D)
chain hoist or a 5-ton wrecker
Personnel Required
M998 or M1037 cargo/troop carrier
M288 mounting kit
One mechanic
One assistant
Tools
References
General Mechanic's Tool Kit
SC 5180-90-CL-N26
TM 9-2320-280-20
Automotive Shop Equipment
TM 3-1040-276-10
SC 4910-95-CL-A74:
Portable drill-l /2 inch
General Safety Instructions
Twist drills-7/32, 9/32, 13/32
Always wear eye protection when drilling or when
Goggles
working under vehicle. Eye injury may result if
metal chips or falling dirt get into eyes.