TM 3-1040-281-20&P
2-9. M288 MOUNTING KIT (CONT).
b. Fog Oil Tank Assembly.
WARNING
Fog oil is very slippery. Cleanup all spills
immediately to prevent injury to person-
nel. Do not drain fog oil near open flames
or while smoking.
NOTE
Reducers, valves, elbows, adapters, and
strainer assemblies are removed from
both sides of the fog oil tank assembly
the same way. Hoses may contain fog oil.
Have a suitable container available.
a. Loosen fog oil hose clamps (1) and pull hoses (2
and 3) from adapters (4 and 5) and on fog oil
tank (6). Drain hoses into a container.
b. Remove reducers (7), strainer (8), valves (9),
elbows (10), and adapters (4 and 5) from fog
oil tank.
c. Remove check valve (11).
d. Remove one of the cage mount assemblies and smoke generator (p 2-14).
2
WARNING
Fog oil is very slippery. Clean
up all spills immediately to pre-
vent injury to personnel. Do
not drain fog oil near open
flames or while smoking.
plug valve on fog oil tank and drain tank
into a suitable container. Close plug
valve and disconnect drain hose.
b. Remove 6 screws (12),12 washers (13),
and 6 nuts (14) securing fog oil tank
assembly (6) to frame assembly (15).
c. Remove fog oil tank assembly from
frame assembly using a chain hoist or
wrecker.