TM 3-1040-281-20&P
d. Fuel Can Bracket Assembly.
REMOVAL/INSTALLATION
e. Fuel Can Base Plate.
REMOVAL/INSTALLATION
NOTE
Procedure is the same for right and
left fuel can base plates. Right side
shown, left side is opposite.
a. Remove fuel can bracket assembly (p 2-21 ).
b. Remove 7 screws (1), 14 washers (2), and 7
nuts (3) securing fuel can base plate (4) and
base plate doubler (5) to wheelhouse (6).
c. Install fuel can base plate (4) on wheelhouse (6)
with base plate doubler (5), 7 screws (1), 14
washer (2), and 7 nuts (3).
d. Install fuel can bracket assembly (p 2-21 ).