TM 3-1040-281-20&P
g. Fog Oil Hoses.
REMOVAL/INSTALLATION
WARNING
Fog oil is very slippery. Cleanup all spills immediately to prevent injury to personnel. Do not drain
fog oil near open flames or while smoking.
NOTE
Removal/installation of one of the fog oil inlet hoses is shown. Remove/install the other fog oil
inlet hose and the fog oil exhaust hoses the same way. Hoses may contain fog oil. Have a suitable
container available.
a. Remove tie down straps (1) securing fog oil inlet hose (2) to top cage mount and to fog oil exhaust hose.
b. Loosen hose clamps (3) and pull fog oil inlet hose (2) from fog oil tank supply adapter (4). Drain hose into a
container. Pull other end of hose from elbow (5) on fog oil pump.
c. Remove hose clamps (3) from ends of hose.
d. Fabricate replacement fog oil inlet hose or exhaust hose (fig E-1 or E-2, app E).
e. Slide hose clamps (3) on ends of hose (2). Install hose on adapter (4) and elbow (5). Tighten hose damps.
f. Secure fog oil inlet hose (2) to top cage mount and to fog oil exhaust hose with tie down straps (1).