TM 3-1040-281-20&P
2-11. FOG OIL TANK ASSEMBLY.
This task covers replacement of:
b. Retaining Straps and Anchor Straps (p 2-30)
INITIAL SETUP
Materials
Trichloroethane technical (item 12, app D)
Facilities and Equipment
Tools
Personnel Required
General Mechanic's Tool Kit
One mechanic
SC 5180-90-CL-N26
One assistant
a. Fog Oil Tank and Insulating Pads.
REMOVAL
a. Using a suitable container and drain hose (fig E-3), drain fog oil tank (1) through plug valve (2). Close plug
valve (2) and disconnect drain hose.
b. Loosen hose clamps (3) and pull fog oil hoses (4 and 5) from adapters (6 and 7) on both sides of fog oil tank.
Drain fog oil hoses into a container.
c. Remove adapters (6 and 7), valves (8), elbows (9), strainer assemblies (10), and reducers (11) from both
sides of fog oil tank.
d. Remove check valve (12).