TM 3-1040-281-20&P
d. Dust and Moisture Boot.
REMOVAL/INSTALLATION
a. Unscrew filler opening cap (1) and remove strainer screen (2) from fog oil tank (3).
b. Remove safety wire from 12 screws (4) securing filler opening neck (5) and remove neck.
c. Remove strainer retainer (6) and replace if corroded or otherwise damaged. Remove dust and moisture
boot (7), and replace if ripped or otherwise damaged.
d. Install dust and moisture boot (7) in fog oil tank (3). Install strainer retainer (6) in dust and moisture boot (7).
e. Position filler opening neck (5) on fog oil tank (3) and source with 12 screws (4) and safety wire.
f. Install strainer screen (2) in fog oil tank (3). Screw filler opening cap (1) onto fog oil tank (3).