TM 9-5985-315-34P
Section I. INTRODUCTION
1. Scope. This manual lists spares and repair parts
b. Source,
Maintenance,
and
Recoverability
that are required for maintenance of Generator, Pulse,
(SMR) Codes.
Hewlett-Packard Model 214B.
It authorizes the
requisitioning and issue of spares and repair parts as
(1) Source Code. Source codes indicate the
indicated by the source and maintenance codes.
manner of acquiring support items for maintenance,
repair, or overhaul of end items. Source codes are
2. General. This repair parts and special tools list
entered in the first and second positions of the uniform
(RPSTL) is divided into the following sections:
SM R code format as follows:
Code
Definition
and repair parts authorized for use in the performance of
maintenance. The list also includes parts which must be
PA -
Item
procured
and
stocked
for
removed for replacement of the authorized parts. Parts
anticipated or known usage.
are listed in alphabetical sequence within each figure
number.
(2) Maintenance Code. Maintenance codes
are assigned to indicate the levels of maintenance
b. Section III. Special Tools List. Not applicable.
authorized to USE and REPAIR support items. The
maintenance codes are entered in the third and fourth
positions of the uniform SMR code format as follows:
Number Index. A list, in National item identification
number (NIIN) sequence, of all National stock numbers
(a) The maintenance code entered in
(NSN's) appearing in the listings, followed by a list in
the third position will indicate the lowest maintenance
alphanumeric sequence of all part numbers appearing in
level authorized to remove, replace, and use the support
the listings.
NSN's and part numbers are cross-
item. This position will contain the following code:
referenced to the figure and item number appearance.
Code
Application/Explanation
3.
Explanation of Columns
F-
Support item is removed, replaced, and
a. Illustration. This column is divided as follows:
used at the direct support level.
(1) Figure Number.
Indicates the figure
(b) The maintenance code entered in
number of the item shown.
the fourth position indicates whether the item is to be
repaired and identifies the lowest maintenance level with
(2) Item Number.
The number used to
identify each item called out in the list.
1