CHAPTER 7
SHIPMENT AND LIMITED STORAGE AND DEMOLITION TO PREVENT ENEMY USE
Section I. SHIPMENT AND LIMITED STORAGE
95. Disassembly
Use the following procedure to prepare Signal
97. Repackaging Signal Generator AN/ URM-70
Generator. AN/URM-70 for shipment and storage.
Package Signal Generator AN/URM-70 as follows:
a. Disconnect the cables and adapters and store
a. Place each manual in a close-fitting bag made
them in their proper location.
of waterproof barrier material. Seal all seams and
openings with pressure-sensitive tape.
b. See that all spare fuses, tubes, and panel lamps
are securely in place and will not shake loose.
b. Wrap the signal generator with single-faced
corrugated paper.
c. Place the power cord plug ill the unmarked
receptacle on the front panel.
c. Fasten the wrapping with gummed paper tape.
d. Place the cover on the transit case and snap the
98. Field Packing and Marking
fasteners.
a. Make a wooden box to fit the packaged signal
generator and manuals snugly.
96. Field Repackaging Data
a. Materials Required. The following materials are
b. Fit the shipping container with a lining of
required for packaging Signal Generator AN/IURM-70.
waterproof barrier material.
Seal all seams and
openings with pressure-sensitive tape.
Material
Quantity
c. Place the signal generator in the lined shipping
container; be sure that the signal generator fits snugly.
Waterproof barrier material ..............
16 square feet.
Add corrugated paper as filler to prevent movement of
Single-faced corrugated paper .........
18 square feet
the generator during shipment.
Pressure-sensitive tape....................
10 feet
Gummed paper tape ........................
9 feet
d. Place the manuals on top of the packed
Lumber ................................ ............
18 board-feet
generator and seal the barrier material with pressures
sensitive tape.
e. Place the cover on the shipping container and
b. Box Size. The dimensions of the shipping
nail it in place. Strap shipping containers for intertheater
container required for the signal generator are given in
movement only.
the chart below.
f. Mark shipping containers in accordance with the
requirements of section II, chapter 2, SR 55-720-1.
Box No.
Height
Width
Depth
Board
Volume
Packed
(in.)
(in .)
(in.)
ft.
(cu. ft.)
weight
(lb)
1 of 1
201/2
24%
191/2
18
5.52
160
66
