Section V
Paragraphs 5-3 to 5-4
GENERAL TYPES - Cont.
NAME
REQUIRED CHAR CHACTERISTICS
Input Impedance: 2 megohms or more
25 uuf or less
Frequency Characteristic - Uniform from 20
to 20,000 Cps
Audio Oscillator
Frequency range 20 to 15,000 cps
output -1 volt
Frequency METER
Secondary frequency standard - 0. 001%
Range - 5000 - 10,000 Kilocycles
.
5-3. SPECIAL TOOLS.
nance, alignment, and overhaul operations on Signal
5-4. The special tools required to perform mainte-
Generator SG-13/ARN are listed below.
FIGURE 5-1
PART NUMBER
NAME
APPLICATION
INDEX NO.
5046016001
Tuning Wand
Detuning; Brass end
1
for adjusting C-1529
Phillips
2
Screwdriver #2
5046027002
Alignment
Adjusting T-1501, 2-1501,
3
Tool
T-1502, and trimmer
capacitors
Phillips
4
Screwdriver #1
Bristo Wrench #10
5
set screw
Bristo Wrench #8
6
set screw
Bristo Wrench #6
7
set screw
Bristo Wrench #4
8
set screw
22
