TM11-6625-2948-14+P
TABLE 1-2. TECHNICAL CHARACTERISTICS (Continued)
Specification
Characteristic
Distortion
At least 60 dB below the power of the desired R F test signal
Spurious Signals
At least 30 dB below the power of the desired RF test signal
Deviation up to 15 kHz peak
Residual FM
Shall not exceed 0.5%
Residual AM
Internal Synchronization
25 to 100 volts, positive
Amplitude
5 microseconds, maximum
Width
External Synchronization
Any external sine wave signal from 40 Hz to 4000 Hz having an amplitude
Sine Wave
from 5 to 50 volts rms. will synchronize the generator
Any external pulse signal from 40 to 4000 pulses per second, a pulse width
P u l s e Signal
from 0.5 to 5 microseconds, and a peak amplitude within the range of 5 to
50 volts will synchronize the generator
3 to 300 microseconds, continuously adjustable
Synchronization Delay
Sawtooth, delay, undelayed, FM, and pulse
Output Signals
Type N
Output Connector
115/230 volts, 50-60 and 400 Hz, 250 watts
Power Requirements
7" H x 16-3/4" Wx 17" D
Dimensions
50 pounds
Weight
1-6
