TM
11-6625-3041-30/T0
33A1-8-908-12
2-16. POWER CABLE REPAIR (CONT)
Male
Connector
Disassembly
Use flat-tip screwdriver to remove the two strain-relief
screws.
Remove strain-relief cover.
Use flat-tip screwdriver to remove the three body screws.
Slip strain-relief back on cable 3 or 4 inches.
All wires must be the same length. To repair a broken wire, it
Male
is necessary to cut all wires to the same length.
Connector
Broken Wires
Use flat-tip screwdriver to loosen all three contact screws.
Pull wires out of contacts.
2-37
