TM 3-1040-281-20&P
2
NOTE
Reducers, valves, elbows, adapters,
and strainer are installed the same
way on both sides of the fog oil tank
except that elbows are at different
angles. Discard parts removed.
a. Remove existing adapter (8) and cap (9)
from fog oil tank and install check valve (10).
b. Remove protective plug (11) and install
reducer (12), ball valve (13), elbow (14), and
adapter (15) in fog oil tank return port (16).
c. Remove protective plug (17) and install
reducer (18), strainer assembly (19),
elbow (20), ball valve (21), and adapter (22)
in fog oil tank supply port (23).
d. Cage Mount Assembly
INSTALLATION
NOTE
Left and right cage mount assemblies are installed the same way.
Position bottom cage mount (1) on frame assembly (2) and secure with four screws (3), eight
Washer (4), and four nuts (5).
2-5
