TM11-6625-2948-14+P
a. Packaging for Short Term Storage. If the Signal Gener-
ator
AN/URM-206
is
to
be
stored
for
a
relatively
short
period, cover it with a suitable protective covering such as
a sheet of plastic or paper. Put the accessories and instruc-
b . Connect the external synchronizing signal to the EXT
tion manual in an envelope or bag and fasten it to the
INPUT connector of the modulator.
AN/URM-206 to prevent loss. Store in a clean and dry
area where it will not be subjected to extreme tempera-
c. Set the SELECTOR switch of the modulator to either
tures. Save the packing material for future, safe shipping
EXT(+) for a positive input or EXT(-) for a negative input
requirements.
pulse signal and to either EXT(+) or EXT(-) for sine wave
signal.
b. Packing for Long Term Storage or Shipment. If the
AN/URM-206 is to be stored for a long time or shipped,
proceed as follows: Save the original wrappings and carton
--. Set the FUNCTION switch to INT
d
.
and re-package the instrument in them. The original pack-
ing material properly cushions the instrument for shipment.
e.
Set MODULATION SELECTOR switch to EXT