TM 3-1040-276-10
MALFUNCTlON
TEST OR INSPECTION
CORRECTIVE ACTION
Check for starting air. Unscrew air hose (4) from flowjector (5) by hand, place
Step 2.
thumb over end of air hose, and press air release button (6).
a. If weak or no air, air accumulator, valves, or connections are faulty. Report
on DA Form 2404 to your supervisor.
b. If air is felt by thumb, air pressure gage is faulty. Connect air hose to
flowjector and continue operation until mission is over. Report faulty air
pressure gage on DA Form 2404 to your supervisor.
2. ENGINE FAILS TO START.
Step 1. Check fuel from fuel tube. Pull fuel tube (2) from fuel metering jet (3). Lower tube below
float bowl (4).
a. If fuel flows freely from tube, turn off float bowl toggle valve (5) and go to
next step.
NOTE:
INDEX NUMBER (1) DELETED.
b. If fuel doesn't flow freely from tube:
(1) Clean fuel sediment strainer (p 3-8).
(3) If fuel doesn't flow freely from tube, report on DA Form 2404 to your
supervisor.
Change
1
3-3