TM 3-1040-276-10
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step 4. Check for starting air.
Refer to malfunction 1, step 2.
Step 5. Check if engine will start,
Report on DA Form 2404 to your supervisor.
3. ENGINE STALLS.
Step 1. Raise float bowl and check if engine will start.
Go to step 2.
Step 2. Check for water in fuel.
Open fuel drain cock on bottom of fuel tank and drain any water.
Step 3. Check fuel flow from fuel tube.
Refer to malfunction 2, step 1.
Step 4. Remove engine head assembly (p 3-11) and check for damaged or
sticking engine
valve.
Replace engine head assembly with spare.
Step 5. Start engine and check if engine still stalls.
Report on DA Form 2404 to your supervisor.
4. NO WHITE SMOKE OUTPUT.
Step 1. Check for open drain cock on M4 fog oil pump.
Close drain cock (1) as shown.
Change 1
3-5