Figure 20. Signal Generator SG-3/U, bottom view of interior.
place over the FREQ. IN MEGACYCLES
(2) Unsolder the leads leading to C21, C15, the
dial.
plate lead of V5, and the three center tap
(7) Position the dial cover. Replace the four
leads of L2 (fig. 22).
screws which secure tile cover to the front
(3) Remove the four screws that secure the
panel.
base of the assembly to its mounting plate
(8) Replace the dial lock, TUNING dial and
knob, and( the 200-400MC TRIMMER knob.
(4) Remove the C16 capacitor assembly.
62. Disassembly
and
Assembly
of
Capacitor
Note
Assembly C16
Capacitors C18 and C19 and coil L2
are components of the tuning capacitor
(1) Remove the rf assembly by following the
instructions given in paragraph 61.
43
